Motorola AP-7131 Product Reference Manual page 173

Kerberos Password
5. Configure the Advanced
beacon transmissions, broadcast ESSID acceptance and Quality of Service (QoS) policies.
Disallow MU to MU
Communication
Use Secure Beacon
Accept Broadcast
ESSID
Quality of Service
Policy
CAUTION When using the access point's hotspot functionality, ensure MUs are
!
Enter a Kerberos password if
security scheme from within the
is grayed out if Kerberos has not been selected for the WLAN. For
information on configuring Kerberos, see
Authentication on page
field as required to set MU interoperability permissions, secure
The MU-MU Disallow feature prohibits MUs from communicating
with each other even if they are on different WLANs, assuming one
of the WLAN's is configured to disallow MU-MU communication.
Therefore, if an MU's WLAN is configured for MU-MU disallow, it
will not be able to communicate with any other MUs connected to
this access point.
Select the Use Secure Beacon
access point's ESSID. If a hacker tries to find an ESSID via an MU,
the ESSID does not display since the ESSID is not in the beacon.
Motorola recommends keeping the option enabled to reduce the
likelihood of hacking into the WLAN.
Select the Accept Broadcast ESSID
MU that has a blank ESSID (regardless of which ESSID the access
point is currently using). Sites with heightened security
requirements may want to leave the checkbox unselected and
configure each MU with an ESSID. The default is unselected, thus
not allowing the acceptance of broadcast ESSIDs.
If QoS policies are undefined (none), select the
launch the New QoS Policy
QoS policy, wherein data traffic for the new or revised WLAN can
be prioritized to best suit the MU transmissions within that WLAN.
For more information, see
(QoS) Policy on page
re-authenticated when changes are made to the characteristics of a
hotspot enabled WLAN, as MUs within the WLAN will be dropped
from device association.
Kerberos has been selected as the
Security Policies
Configuring Kerberos
6-8.
checkbox to not transmit the
checkbox to associate an
screen. Use this screen to create a
Setting the WLAN Quality of Service
5-41.
Network Management
field. The field
Create button to
5-35