Switch Configuration - Motorola AP-7131 Product Reference Manual

10.4.2 Switch Configuration

Both a WS5100 (running firmware version 3.1 or later) or a RFS6000/ RFS7000 (running firmware
version 1.1 or later) require an explicit adaptive configuration to adopt an access point (if IPSec is not
being used for adoption). The same licenses currently used for AP300 adoption can be used for an
AAP.
Disable the switch's Adopt unconfigured radios automatically
requiring adoption, or leave as default. In default mode, any AAP adoption request is honored until
the current switch license limit is reached.
To disable automatic adoption on the switch:
1. Select Network
2. Select the Configuration
Settings button.
3. Ensure the Adopt unconfigured radios automatically
When disabled, there is no automatic adoption of non-configured radios on the network.
Additionally, default radio settings will NOT be applied to access ports when automatically
adopted.
NOTE For IPSec deployments, refer to
Any WLAN configured on the switch becomes an extended WLAN by default for an AAP.
4. Select Network
> Access Port Radios
tab (should be displayed be default) and click the
IPSec and Independent WLAN on page 10-19
commands in red and associated comments in green.
> Wireless LANs from the switch main menu tree.
option and manually add AAPs
from the switch main menu tree.
option is NOT selected.
Sample Switch Configuration File for
and take note of the CLI
Adaptive AP 10-15
Global