Viewing Wireless Statistics - Motorola AP-7131 Product Reference Manual

7-12 AP-7131 Access Point Product Reference Guide
Designated Bridge
Designated Port
Designated Cost
4. Click the
confirming logout before the applet is closed.

7.3 Viewing Wireless Statistics

Use the WLAN Statistics Summary
on the access point. The
Units (MUs) and total throughput for each of the active WLANs. The
basic throughput information for all RF activity on the access point. The WLAN Statistics Summary
screen is view-only with no user configurable data fields.
If a WLAN is not displayed within the
LANs (WLANs) on page 5-28
individual WLANs, see
To view access point WLAN Statistics:
1. Select Status and Statistics
There is only one root bridge within each mesh network. All other
bridges are designated bridges that look to the root bridge for
several mesh network timeout values. For information on root and
bridge designations, see
Networking Support on page
Each designated bridge must use a unique port. The value listed
represents the port used by each bridge listed within the table to
route traffic to other members of the mesh network.
Displays the unique distance between each access point MAC
address listed in the Designated Bridge column and the access
point MAC address listed in the Designated Root column.
Logout button to securely exit the Access Point applet. There will be a prompt
screen to view overview statistics for active (enabled) WLANs
WLAN Summary
Wireless Statistics Summary
to enable the WLAN.
Creating/Editing Individual WLANs on page
->
Setting the LAN Configuration for Mesh
9-6.
field displays basic information such as number of Mobile
For information on configuring the properties of
Wireless Stats from the access point menu tree.
Total RF Traffic section displays
screen,
see Enabling Wireless
5-31.