Motorola AP-7131 Product Reference Manual page 210

5-72 AP-7131 Access Point Product Reference Guide
The Wireless Intrusion Prevention System screen displays.
NOTE At least one radio is required to be set to WIPS (within the Wireless
2. Within the
servicing its coverage area as a typical access point or as a WIPS sensor.
Selecting the
WIPS checkbox defines the radio as a WIPS sensor.
3. Define a primary and alternate WIPS server IP Address within the
WIPS Server 2
This is the address of the WIPS console server.
Intrusion Prevention System screen) to support WIPS on the AP-7131. If
using the access point's CLI interface to define WIPS support, go to the
network > wireless > radio context and issue a
set rf-function <radio idx> wips command.
WIPS Status field, define whether the 802.11a/n or 802.11b/g/n radio is
WLAN checkbox defines the radio as a typical access point. Selecting the
fields.
WIPS Server 1 and