Motorola AP-7131 Product Reference Manual page 207

2. Select either the
enabled for the selected radio and their existing configurations.
The WLANs displaying for the selected radio were assigned when the WLAN was created
or modified. A single WLAN can be assigned to either radio, and if necessary have different
bandwidth management configurations. To modify a WLAN-to-radio assignment, see
Creating/Editing Individual WLANs on page
3. Use the Bandwidth Share Mode
receive access point services. Select one of the following three options:
First In First Out
Round-Robin
Weighted Round-
Robin
4. Configure the Bandwidth Share for Each WLAN
using the Weighted Round-Robin option) for each WLAN. The weight% changes as the
weight is entered.
If a WLAN has not been enabled from the
Bandwidth Management
LANs (WLANs) on page
WLAN Name
Weight
Weight (%)
Radio 1(802.11b/g/n)
drop-down menu to define the order enabled WLANs
WLANs receive services from the
first-served basis. This is the default setting.
Each WLAN receives
access point
has data traffic to forward.
If selected, a weighting (prioritization) scheme (configured within
the QoS Configuration screen) is used to define which WLANs
access point
receive
screen. To enable a specific WLAN, see
5-28.
Displays the name of the WLAN. This field is read-only. To change
the name of the WLAN, see
page 5-31.
This column is not available unless
selected. Assign a weight to each WLAN. This percentage equals
access point
the bandwidth share for that WLAN when network
traffic is detected.
This column is automatically updated with the appropriate WLAN
bandwidth share when the
or Radio 2(802.11a/n)
5-31.
access point
access point
services in turn as long the
resources first.
field to set a raw weight (for WLANs
Wireless screen, it is not configurable using the
Creating/Editing Individual WLANs on
Weighted Round-Robin
Weight is modified.
Network Management
tab to display the WLANs
on a first-come,
Enabling Wireless
is
5-69