The following instructions provide direction to assemble the StairMaster
in the manual are given with the orientation of standing on a level surface and facing the machine.
Assembly
Figure
1
Figure
2
Assembly Manual
®
StepMill
(See Figure 1)
Step 1: Unpacking the StepMill 5
.
Tools:
.
Box Knife
Hammer or Pry Bar
1-1 Remove the outer cardboard box using the
hammer to remove staples along the bottom of
the box.
1-2 Remove all boxes resting on steps and then remove
handrails.
1-3 Remove the wheel panels and misc packaging from
underneath.
1-3 With a hammer or pry bar, remove the wood
securing the back of the machine to the
pallet.
1-4 Remove remaining box from base of steps.
(See Figure 2)
Step 2: Remove from pallet
Tools:
.
Hammer or Pry Bar
2-1 With a hammer or pry bar, remove the wood
securing the front of the machine to the
pallet.
2-2 With the assistance of another person, remove
StepMill machine from the pallet
Use a second person when performing
assembly steps requiring heavy lifting or
awkward movements.
9
®
5. All instructions