Before You Start - Stairmaster StepMill 5 Assembly Manual

Locate the area where you will assemble and use your StairMaster
We recommend you install it on a hard, level surface. Allow an assembly area of at least 36" (0.91 m)
on each side and behind the machine. You can put the rear of the machine closer to the wall during use.
Basic Assembly
Follow these basic assembly tips when putting together your machine:
1. Collect all the pieces needed for each assembly step.
2. Read through and understand the instructions.
3. Turn all bolts and locknuts to the right to tighten, and the left to loosen.
4. Lightly and carefully lift pieces when attaching. Look through the bolt holes to help guide bolt
placement.
5. Two people are recommended to assemble this machine.

Before You Start

5
Assembly Manual
®
Commercial Series StepMill
® 5.