Checking/Setting System Parameters; Setup Parameters - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!

Checking/Setting System Parameters

See the following table for a list of parameters, their factory default settings, and alternate
settings. As you hightlight each parameter, its available settings are explained in the Item-
Specific Help in the bottom of the screen.
Reset the parameters on the displayed screen to their factory default settings, selecting De-
fault Values on the Exit screen.
Table 2-6 Setup Parameters
Parameter
Startup
Date and Time
Boot Device
Boot Display
Power Switch
Components
Serial / IR Ports
Serial Ports
IR Ports
Parallel Port
Parallel IRQ
Parallel DMAC
LPT DMA
Parallel Port Type
LPT Port Type
Audio Base Port
Audio, Midi, IRQ
SOLD BY laptopia2005 DO NOT RESELL!!
Setup and Operation
Alternate
Default
Settings
Setting
DAY, MO, YR,
HR, MIN, SEC
Hard Disk C
Floppy Disk A/
Hard Disk C
CRT, LCD and CRT
LCD
Suspend/Resume
ON/OFF
COM2(2F8h) IRQ3,
COM1(3F8h)
COM3(3E8h) IRQ4,
IRQ4
COM4(2E8h) IRQ3
DISABLED
COM1(3F8h) IRQ4,
COM3(3E8h) IRQ4,
COM2(2F8h)
COM4(2E8h) IRQ3,
IRQ3
DISABLED
LPT1(378h) LPT2(278h),
LPT3(3BCh),
DISABLED
IRQ7 IRQ5
DMA0 DMA1
Bidirectional (PS- Standard AT
2) (Centronics),
EPP, ECP
220h 230h, 240h
IRQ5 IRQ9, IRQ10, IRQ5
IRQ9,
IRQ5, IRQ11, IRQ10
IRQ9, IRQ10, IRQ11
2-19