NEC Versa 2600 Series Service Manual page 59

SOLD BY laptopia2005 DO NOT RESELL!!
2-24
AC and PCMCIA Operation
Miscellaneous
Use this drop-down menu to set the following parameters:
Setup and Operation
T
Good Performance
Provides high system performance and moderate power savings, by reducing CPU
clock speed to one-half of its maximum speed any time the CPU is not engaged
for eight seconds.
T
Maximum Performance
Sets system performance to a maximum and power savings to a minimum, by
running the CPU at full speed all the time.
T
User Setting Battery (the default setting)
Lets you input your choice of performance and power saving parameters. See
"Using Power Management," later in this chapter, for details.
T
User Setting AC
Lets you set performance and power saving parameters for AC operation. Default
settings are for maximum system performance.
T
PCMCIA Power
Permits PC Card socket power to remain on while the system is in Suspend Mode
(see "Using Power Management.")
T
Low battery beep (default)
This parameter lets you know when battery power is low, by emitting a beep
 once, when battery power falls to 10%, and
 every 60 seconds, when battery power falls to 5%.
T
Wake Up Alarm
Lets you specify Resume time for your NEC Versa 2600 anytime of day from
Suspend mode
 one time only or
 everyday at the same time.
T
L2 Cache
Level 2 Cache speeds up your system's data processing time, and is enabled
(checked) by default.
SOLD BY laptopia2005 DO NOT RESELL!!