SOLD BY laptopia2005 DO NOT RESELL!!
Required Tools and Equipment
All NEC Versa corrective maintenance procedures can be performed using the following
tools:
Battery Pack
Remove the battery pack installed in the NEC Versa 2600 system as follows.
T
Tweezers
T
Small flat-head screwdriver
T
Small Phillips screwdriver
T
Small Hex-bolt screwdriver
T
Small utility knife
T
Rubber finger tip
T
Right angled dentist style probe.
Make sure the power is off.
1.
2.
Close the LCD and turn the system over.
3.
Press the battery release latch and slide the battery out of the system.
Figure 4-1 Releasing the Battery Pack
SOLD BY laptopia2005 DO NOT RESELL!!
Field Service Guidelines 4-5
Battery
Release Latch
Battery
Pack