How To Enter Setup; Setup Utility; How To Use Setup; The Setup Screen - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!

Setup Utility

How to Enter Setup

Access Setup immediately after you power on your Versa 2600, during boot up. Just press
the Fn
When you press
parameter settings.

How to Use Setup

The following sections describe how to use Setup, including these topics:

The Setup Screen

The Setup screen looks similar to the one following and has five separate areas.
and Esc keys simultaneously when the following prompt appears.
<Fn - Esc> to enter System Configuration Utility
NOTE
The
of the NEC Versa 2600 keyboard. The
is located on the upper-left of the NEC Versa
2600 keyboard.
Fn Esc and enter Setup, the system automatically displays current system
T
The Setup Screen
T
Using keys
T
Checking and setting system parameters.
Menu Bar
SystemSoft SCU
Startup Components Security
System Information
Hard Drive : 1031 MB
Current Display : LCD
LCD type : TFT (800x600)
Battery Remain : 54%
Password : Disable
Press <Alt> key to activate menus, and cursor keys to navigate. Spacebar or
<Enter> keys accept menu item. <Esc> key cancel current action.
Item Specific Help Area
SOLD BY laptopia2005 DO NOT RESELL!!
Fn key is located on the lower-left
Nov 18, 1996 12:25:23 pm
Key Power Miscellaneous Exit
System
CPU Type = Pentium
CPU Clock = 133 MHz
Memory
Base =
Extended = 15360 KB
Total RAM = 16384 KB
Cache (Ext) =
Setup and Operation
Esc key
640 KB
256 KB
2-17