SOLD BY laptopia2005 DO NOT RESELL!!
At this point the following components maybe removed from the unit independently.
The Sound Board must be removed to disassemble the computer further (i.e. CD-ROM
Reader, Bridge Battery, FDD/HDD Connector Board, Diskette Drive, Power Board and
Main Board).
VersaGlide Assembly
Remove the, VersaGlide, as follows
T
Sound Board
T
VersaGlide
T
LED Status Board
T
IR board
1.
Remove the prior assembly as previously described.
Locate the cables that are attached to the sound board at connector CN407 and
2.
CN406 disconnect both cables.
Figure 4-10 Disconnecting the VersaGlide Cables
SOLD BY laptopia2005 DO NOT RESELL!!
Field Service Guidelines 4-13