Nec Versa 2600 Series Disassembly Sequence; Disassembly And Reassembly - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!
4-4 Field Service Guidelines

DISASSEMBLY AND REASSEMBLY

This section contains step-by-step disassembly procedures for the system. Reassembly is
the reverse of disassembly. Each procedure is supported by a simplified disassembly illus-
tration to facilitate removal. The Illustrated Parts Breakdown and parts lists for the system
unit are shown later.
For complete disassembly of the system, follow the disassembly order listed in
Table 4-1. To reassemble, follow the table in reverse order.
Sequence
10
11
12
13
When disassembling the system unit, follow these general rules.
Table 4-1 NEC Versa 2600 Series Disassembly Sequence
Part
1 Battery Pack
2 Hard Disk Drive
3 Keyboard
4 Heat Shield and CPU Board
5 LCD and Top Cover
6 VersaGlide Assembly
7 Sound Board
8 LED Status Board and IR Board
9 10X CD-ROM Reader and Heat Shield
Bridge Battery and FDD/HDD Connector Board
Diskette Drive
Power Board
Main Board
T
Turn off and disconnect all power and all options, including the AC adapter (if
connected) and battery packs (see the procedures that follow).
T
Do not disassemble the system into parts that are smaller than those specified in
the procedure.
T
Label all removed connectors. Note where the connector goes and in what posi-
tion it was installed.
SOLD BY laptopia2005 DO NOT RESELL!!
See Page
4-5
4-6
4-7
4-9
4-11
4-13
4-14
4-15
4-15
4-16
4-17
4-18
4-18