Removing The Cpu Board - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!
4-10 Field Service Guidelines
To lift out the heat sink/shield subassembly. Lift at the location shown in Figure
2.
4-6 and gently move this corner in a clockwise direction while lifting up on the
heat/shield subassembly and at the same time gently apply a slight outward press
to the plastic forward of the inboard right latch cover.
3. Now lift the front edge of the CPU board gently until the CPU board separates
the connectors on the main board.
Figure 4-7 Removing the CPU Board
SOLD BY laptopia2005 DO NOT RESELL!!