Serial Port (Com1); Ac/Dc Power Port; Hardware Overview-Internal Components; Battery Pack - NEC Versa 2600 Series Service Manual

SOLD BY laptopia2005 DO NOT RESELL!!
The parallel port's default is PS/2 mode. Use Setup to change the default to one of the fol-
lowing.

Serial Port (COM1)

The 9-pin serial port provides a serial interface to which you can connect an RS-232C de-
vice such as an external serial printer or modem. A serial mouse is not supported.

AC/DC Power Port

Use the power jack to attach the NEC Versa to an appropriate DC power source, such as
the NEC Versa 2600 AC adapter or the optional NEC Versa 2600 DC car adapter.
HARDWARE OVERVIEW—INTERNAL COMPONENTS
Review the following sections for a description of the system's internal hardware.

Battery Pack

The system uses a rechargeable lithium-ion (Li-Ion) battery or rechargeable nickel metal-
hydride (NiMH) as its transient power source. The battery pack installs in the compartment
next to the CD ROM reader on the front of the NEC Versa. The Li-Ion battery stores 14.4
volts with a 2700 mAh capacity and the NiMH stores 9.6 volts with a 3500 mAh capacity.
The battery pack powers the NEC Versa for approximately 1:40 to 4 hours depending on
battery type and power management choice.
When battery power is getting low, connect the AC adapter to a wall outlet and recharge
the battery. It takes 3 to 4 hours to recharge the battery.
T
Standard
T
EPP
T
ECP
SOLD BY laptopia2005 DO NOT RESELL!!
Technical Information 1-9