Operating The Motor With The Parameter Unit - Mitsubishi Electric Freqrol Z024-UL Instruction Manual

OPERATING THE MOTOR WITH THE PARAMETER UNIT
The operator can startlstop the motor with PU, without any external frequency reference
potentiometer, or start switch. JOG operation is also available with PU. Follow the key operation
below to control the motor.
Operating Procedures
Frequency setting
.....
By repeating this procedure during operation, it is possible to vary the
rotation rate.
The increase (or decrease) of frequency is slow initially, after the key is pressed, but increases
as the key is held depressed.
-46-