Mitsubishi Electric Freqrol Z024-UL Instruction Manual page 12

To select the PU operation mode:
First, break connection between terminals MRS and SD, then press the PU OP key.
Note: When the operator has changed the function of terminal MRS from 'output shutoff' to 'second
3 .
Attachlng the Front Cover
accelerationldeceleration time selection', it is possible to select the PU operation mode on the
condition that the start signal is OFF.
When attaching the front cover, locate the lower lugs first, into the main cover.
Bring the upper part of front cover to the main cover and press firmly.
it will "click" when in the correct position.
-6-