Mitsubishi Electric Freqrol Z024-UL Instruction Manual page 140

-
Notes : 1. Select MCCB model according to the power supply
Installation range for
power factor improvihg
capacity.
AC
reactor
2. Motor cable size applies to 20 m or less wiring
distance.
Power
the right. Applicable ranges A, 8, and C should be
6
5 0 0 10 20
3. The inverter power supply circuit does not require
an MC, however, if you install an MC, it should be
selected in accordance with power supply capacity
and wiring distance as shown in the illustration on
observed. For FR-Z024-0.1 K to 1.5K, select S-K
I O if a power factor improving AC reactor FR-BAL
is used.
Wiring distance (m)
*Motor wiring distance must be under 200 m.
Note : It is assumed that the above
recommended wire size is
used for the power supply
circuit.
-134-