DC DYNAMIC BRAKE ADJUSTMENT
Operating frequency
setting range
Time
k
Time
Operating time
Accuracy of the stop position can be adjusted by setting
the DC dynamic brake torque (voltage), braking time, and
braking start frequency match the load.
Notes: 1 , When the DC dynamic brake is not required, set
brake time to 0.
2.
If speed is decelerated by decreasing frequency
dynamic brake starts operating at 0.5 Hz of output frequency. (initial setting)
voltage
Voltage
DC brake
M
reference signal voltage (or by pressing), the DC
3. Initial setting of
DC dynamic brake voltage : 8%
-
89
-