Installing The Tcp/Ip Protocol On Windows 95 And Windows 98 - Epson Expression 1600 User Manual

Installing the TCP/IP Protocol on
Windows 95 and Windows 98
1. Double-click the
Control Panel. If necessary, click the
Configuration
on the right.
2. Check that
installed network components.
If it appears in the list, go to "Assigning an
IP Address" on page 139.
If you don't see
continue with the next step.
3. Click the
the screen to the right.
4. Select
Protocol
click the
screen to the right appears.
5. Select
Microsoft
Manufacturers list, and
from the Network Protocols list.
Then click
6. Continue with the instructions
below to assign an IP address.
138
icon in the
Network
tab to display the window
appears in the list of
TCP/IP
in the list,
TCP/IP
button. You see
Add
from the list and
button. The
Add
from the
TCP/IP
.
OK