Epson Expression 1600 User Manual page 96

4. Position the slots on the
transparency unit's mounting
bracket over the heads of the
two mounting screws located
at the back of the scanner.
Slide the transparency unit
forward slightly until the two
holes in front of these slots
are aligned with the screw
holes at the back of the
scanner.
5. Insert the two installation
screws that came with the
transparency unit into the screw
holes, then tighten the screws
with a coin.
6. Gently close the transparency
unit.
7. Attach the transparency unit
connector to the
connector at the back of the
scanner. Tighten the attached
screws to secure the connector.
96
OPTION