Loading 4 × 5-Inch Film - Epson Expression 1600 User Manual

Loading 4 × 5-inch film
Follow these steps to load 4
film:
×
1. Place the 4 5-inch film guide on a
flat surface and remove the cover
from one of the film holders.
2. Insert the film in the film holder,
making sure the glossy (smooth)
side of the film faces down and the
film emulsion layer faces up. Then
close the cover.
3. Repeat steps 1 and 2 for all the film
you scan.
×
4. Place the 4 5-inch film guide
on the document table. Make
sure the upper and right edges of
the guide are aligned with the
ruled edges of the document
table.
5. Close the TPU and begin your
scan.
If you're using EPSON TWAIN Pro to scan, make sure to
select TPU Neg or TPU Pos as your document source.
×
5-inch
99