Epson Expression 1600 User Manual page 123

A line of dots is missing from the
image . . .
When a line of dots is missing
from the scanned image on your
screen, the scanner sensor has
malfunctioned. Contact your
EPSON dealer.
When a line of dots is missing
from your printouts, your print
head has malfunctioned. See your
printer manual.
The colors in your scanned image
look different than the colors in
the original document . . .
Run the EPSON Screen
Calibration Utility.
Experiment with the
setting. Click the
Mask
button in the
Destination
EPSON TWAIN Pro main
window to display the Destination
window, then select or deselect
.
Unsharp Mask
Make sure the
Image Type
settings are correct.
Destination
Try different combinations of
gamma and color settings in your
scanner software.
If you're using a transparency unit
or automatic document feeder,
make sure they're closed when
scanning.
Unsharp
and
Use MonacoEZcolor to create
color profiles for your scanner,
printer and monitor. Then use an
ICC-compliant color management
application like Adobe Photoshop
5.0 to apply the profiles. See the
MonacoEZcolor User Guide for
instructions.
If you're using profiles created
in MonacoEZcolor, make sure
color management is turned off
in your scanner software. Click
the
Configuration
in the EPSON TWAIN Pro
main window to display the
Configuration window; make sure
the or
ICM ColorSync
is deselected.
Moiré (cross-hatch) patterns
appear in the image when you
perform halftone scanning . . .
Make the image size slightly
smaller.
Use a transparent sheet between
the document and the document
table to defocus the image.
Reposition the document on the
document table. Try positioning
the document at a slight angle.
Make sure
Unsharp Mask
deselected in the Destination
window.
button
checkbox
is
123