Loading 35 Mm Slides - Epson Expression 1600 User Manual

4. Place the 35 mm filmstrip
guide on the document table,
as shown. Make sure that the
upper and right edges of the
guide are aligned with the
ruled edges of the document
table.
5. Close the TPU and begin
scanning.

Loading 35 mm slides

Follow these steps to load 35 mm slides:
1. Load slides in the 35 mm slide holder as
shown. Make sure the glossy side of each
slide faces down, and the film emulsion
layer faces up.
2. Position the slide holder on
the document table. The upper
and right edges of the guide
should be aligned with the
ruled edges of the document
table.
3. Close the TPU and begin your
scan.
98
Make sure to select TPU for Neg. Film or TPU for Pos. Film as
your Document Source in EPSON TWAIN Pro.
If you're using EPSON TWAIN Pro to scan, make sure to
select TPU Pos as your document source.