Connecting To A Usb Interface - Epson Expression 1600 User Manual

Connecting to a USB Interface

With the USB interface, you can connect or remove your scanner without having to
shut down or restart your computer.
Windows 98 must be preinstalled on your computer, not upgraded from
Windows 95. There is no USB support for Windows 95 or Windows NT 4.0.
1. Locate the USB cable that came with your scanner.
2. Connect the square end of the USB
cable to the scanner's USB port.
3. Connect the flat end of the USB
cable to your computer's USB port
or USB hub port.
If your scanner and computer are both powered on, you see the Add New Hardware
Wizard (Windows) or a message that your scanner driver needs to be installed
(Macintosh). Continue with the instructions in "Installing the Windows Software" on
page 30 or "Installing the Macintosh Software" on page 47.
26
Don't disconnect or connect the USB cable when the
Expression 1600 is scanning.
If you're using a USB hub, connect the scanner to a first tier
hub, which is the hub closest to the computer. If the scanner
doesn't work with the hub, connect it directly to a USB port
on your computer.