Epson Expression 1600 User Manual page 121

Your scanned image is faint or has
gaps . . .
Check the brightness. Decrease the
software or driver's brightness
setting.
Try adjusting the
Gamma
settings in the Image
Exposure
Controls window.
Check the condition of your original.
If the document is damaged, dirty, or
wrinkled, these imperfections will
show up in your scan.
Make sure the document is placed
flat against the document table.
Your scanned image is blurred or
distorted . . .
Check the position and condition of
your document. Make sure the
document is placed flat against the
scanner's document table glass. If
and
only part of the image is blurred, part
of your document may be wrinkled
or warped.
Make sure the document table glass is
clean.
Make sure the scanner is on a flat,
stable surface.
121