Using The Film Guides - Epson Expression 1600 User Manual

If you haven't connected the scanner to your computer, continue with "Connecting
the Scanner to Your Computer" on page 25. Then plug the scanner in and turn it on.
See "Step-by-Step Scanning Instructions" on page 57 for scanning instructions. For
more detail on scanning with EPSON TWAIN Pro, see your electronic EPSON
Expression 1600 Software Reference Guide.

Using the Film Guides

You can use the four film guides that came with the TPU to scan 35 mm slides, strips
of 35 mm negative or positive film, 120-size or 220-size format film, and 4
film.
Loading 35 mm film
Follow these steps to load 35 mm positive or
negative film:
1. Place the 35 mm filmstrip guide on a flat
surface and remove the cover from one of
the strip holders.
2. Insert a filmstrip in the holder, and then
close the cover. The glossy (smooth) side of
the film should be facing down, and the
film emulsion layer should be facing up.
3. Repeat steps 1 and 2 for all the film strips
you scan.
5-inch
×
97