If You're Running Windows 95 Or Windows 98 - Epson Expression 800 Setup Manual

If You're Running Windows 95 or Windows 98. . .

Depending on how your computer system was originally set up, you may be asked to
insert your Windows operating system CD-ROM during the scanner installation.
Please have your Windows CD-ROM handy, in case it is needed.
1. Turn on your scanner first; then turn on your computer. A screen appears saying
that your system has detected new hardware.
If your system doesn't automatically detect the SCSI board,
run EZ-SCSI, a special Windows SCSI configuration utility.
Insert your EPSON Expression 800 Scanning Tools
CD-ROM in your drive. Click Start, then click Run. Type
D:\Adaptec\Ezscsi\Setup in the textbox (where D: is your
CD-ROM drive), then click OK.
2. Click . You see the screen to the
Next
right.
3. Make sure
Search for the best driver
is selected. Insert the
for your device
EPSON Expression 800 Scanning
Tools CD-ROM in the CD-ROM
drive, then click
4. When you see the screen to the right
prompting you for the location of the
driver, deselect
Floppy disk drives
and check
Specify a location.
use the Browse function to specify
either
D:\EPSON\Drivers\Win98
D:\EPSON\Drivers\Win95
is your CD-ROM drive).
.
Next
Then
or
(where
D:
17