Using The Video Setup - Denon DVD-5910 Operating Instructions Manual

Dvd audio-video/super audio cd player
Hide thumbs Also See for DVD-5910:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH

12 USING THE VIDEO SETUP

2 The video output setting of the HDMI and the DVI-D connectors can be changed.
2 The video output setting of the PICTURE MODE, TV SYSTEM, SQUEEZE MODE and AUDIO ADJUST also can be changed.
ON / STANDBY
The HDMI and DVI indicators flash when the connection is being
checked, then stop flashing, once the check is completed.
Press the HDMI/DVI SELECT button.
• The modes described below will appear on the display.
HDMI/DVI OFF (Factory default)
Not output via the HDMI and DVI-D connectors. Set to
"OFF" when not connecting to these connectors.
HDMI Y Cb Cr
The Y Cb Cr format video signals and audio signals are
output via the HDMI connector.
The RGB format video signals are output via the DVI-
1
D connector.
HDMI RGB
The RGB format video signals and audio signals are
output via the HDMI connector.
The RGB format video signals are output via the DVI-
D connector.
When connecting to the DVI device via the HDMI
connector, signals are output in RGB format
regardless of whether "HDMI Y Cb Cr" or "HDMI
R G B" is set.
Press the HDMI/DVI FORMAT button.
• The modes described below will appear on the display.
Select the item you wish to set and define it.
480P/576P (Factory default)
Outputs the image via the HDMI or DVI-D connector
at 480P or 576P.
720P
Outputs the image via the HDMI or DVI-D connector
at 720P.
1080i
Outputs the image via the HDMI or DVI-D connector
at 1080i.
2
AUTO
The performance of the HDMI device connected to
the HDMI/DVI-D connectors is detected automatically
and the signals are output according to the HDMI
device's panel resolution or maximum resolution. The
panel resolution or maximum resolution is selected
according to the setting made at "HDMI AUTO
FORMAT" in the initial settings. (By factory default
this is set to "PANEL RES."(see pages 33, 36.)).
When a DVI device is connected, the signals are
output
automatically, so set the resolution manually.
56
OPEN/CLOSE
Display the setting mode
with
a
resolution
of
"480P/576P"
PLAY
STOP
STILL / PAUSE
VIDEO MODE
HDMI / DVI
SUPER
PURE
SELECT
FORMAT
AUDIO CD
DIRECT
SET UP
SELECT
PUSH ENTER
DVD-5910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
1 2
3,4
HDMI / DVI
SELECT
FORMAT
Main unit
HDMI/DVI
SELECT
FORMAT
Remote control unit
HDMI / DVI
SELECT
FORMAT
Main unit
HDMI/DVI
SELECT
FORMAT
Remote control unit
1
2
SELECT
FORMAT
NTSC/PAL
ANGLE
SUBTITLE
AUDIO
HDMI/DVI OFF
HDMI Y Cb Cr
HDMI R G B
480P/576P
720P
1080i
AUTO
ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd-5910ci

Table of Contents