Denon DVD-5910 Operating Instructions Manual page 15

ENGLISH
(4) Connecting a basic 5.1-channel surround system
Analog 5.1-channel audio signals can be output from the DVD-5910.
The multi-channel audio signals recorded in packed PCM and the multi-channel Super audio CDs can be played when an AV amplifier
equipped with analog 5.1-channel audio inputs is connected.
DVD-5910
NOTES:
• For multi-channel connections, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "MULTI CHANNEL" and make
the "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" settings. (See pages 40 ~ 44.)
• With the DVD-5910, we recommend turning the digital output off by using the "PURE DIRECT MODE" and only outputting analog
signals in order to keep interference from the digital output circuitry to a minimum and allow you to enjoy high-quality multi-
channel sound thanks to the high-bit, high sampling frequency. (See pages 50, 51.)
CH SEL
ENTER
AV amplifier with 5.1-channel input terminals
ENGLISH
To power outlet
15