Denon DVD-5910 Operating Instructions Manual page 12

ENGLISH
(2) Connecting to a TV or Monitor Equipped with Component video Input Connectors
Component video output connectors (P
The red (P /C
R R
reproduction of the video.
• The component video input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C
• Connect in this way if your TV is compatible with Progressive Scan.
DVD-5910
L
AUDIO IN
NOTES:
• Use the three commercially available video cords to connect the DVD-5910's component video output connectors to the TV or
monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV is NTSC formatted set
to NTSC. (See pages 37, 38.)
• Set the "COMPOMENT VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV.
• Use the "2ch AUDIO OUT" connectors to connect a TV to the DVD-5910. To use with 5.1ch audio output, set "2CH (SRS OFF)"
or "2CH (SRS ON)" in "AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the initial settings. (See pages 40, 41.)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See pages 37, 38.)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION"
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
12
/C
R
), blue (P /C ) and brightness (Y) signals are output independently, achieving more faithful
B B
, C and Y, etc.). For details, refer to the TV's operating instructions.
R B
TV
R
, P /C and Y)
R B B
Y P /C P /C
B B R R
COMPONENT VIDEO IN
ENGLISH
, P and Y/R-
R B
To power outlet