Using The Super Audio Cd Setup - Denon DVD-5910 Operating Instructions Manual

ENGLISH
Press the PURE DIRECT SELECT button.
The modes described below will appear on the display.
NORMAL : All signals are output normally.
MODE 1 : The settings stored for MODE 1 are used.
4
MODE 2 : The settings stored for MODE 2 are used.
ALL OFF : No indicate in Display of the main unit,

10 USING THE SUPER AUDIO CD SETUP

2 On a Super Audio CD, the stereo and multi - channel areas are separate.
Hybrid discs comprise 2-layer structure of Super Audio CD layer and a CD layer.
The area/layer can be set to be played with priority.
ON / STANDBY
Press the SUPER AUDIO CD SETUP button.
• The modes described below will appear on the display.
MULTI (Factory default)
When playing a Super Audio CD disc, the multi -
channel area will be played back with priority.
STEREO
When playing a Super Audio CD disc, the stereo area
1
will be played back with priority.
CD
When playing a Super Audio CD disc, the CD layer will
be played back with priority.
When playing back a disc that does not have a
selected area/layer, another area/layer will be played
back automatically.
The factory default settings are:
"DIGITAL OUTPUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
The factory default settings are:
"DIGITAL OUTPUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
video and digital signals are not out.(except
analog audio output)
Display the setting mode
PURE
DIRECT
SELECT
Main unit
OPEN/CLOSE PLAY STOP
STILL / PAUSE
VIDEO MODE
HDMI / DVI SUPER PURE
SELECT FORMAT AUDIO CD DIRECT
SET UP SELECT
PUSH ENTER
DVD-5910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
1
SUPER
AUDIO CD
SETUP
Main unit
SUPER AUDIO
CD SETUP
Remote control unit
PURE DIRECT
MEMORY SELECT
Remote control unit
SELECT FORMAT NTSC/PAL
1
ANGLE SUBTITLE AUDIO
MULTI
STEREO
CD
ENGLISH
51