DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER DVD-5900 OPERATING INSTRUCTIONS INSTRUCCIONES DE OPERACION AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ¢ ON / STANDBY £ REMOTE SENSOR FOR ENGLISH READERS PARA LECTORES DE ESPAÑOL PLAY STOP STILL / PAUSE...
2. Do not open the top cover In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON DEALER. 3. Do not place anything inside Do not place metal objects or spill liquid inside the DVD audio-video/ Super audio CD player.
PANNEAU AVANT PANEL FRONTAL AL24 PLUS POWER ¢ ON / STANDBY £ REAR PANEL PANNEAU ARRIERE PANEL TRASERO DENON LINK IEEE 1394 SUPER AUDIO CD REMOTE SENSOR @3 @4 @9 #1 u i o !0 PLAY STOP STILL / PAUSE...
Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
Page 5
NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.
R6P/AA batteries ...2 t Power supply cord...1 1 FEATURES 1. Digital transfer connectors The DVD-5900 can be connected to another digital transfer compatible Denon component (AV amplifier, etc.) using a single cable (included) for high quality digital sound with little transfer loss.
Page 7
6. Dolby Digital (AC-3)/DTS decoder (NOTE 2, 3) The DVD-5900 is equipped with a built-in Dolby Digital (AC-3) /DTS decoder, allowing you to recreate the atmosphere of a movie theater or concert hall when using the DVD-5900 in combination with an AV amplifier and speakers.
ENGLISH 2 DISCS • The types of discs listed on the table below can be used on the DVD-5900. The marks are indicated on the disc labels or jackets. Usable Mark (logo) discs DVD video DVD audio (NOTE 1) DVD-R...
Only the discs including the marks shown on page 8 can be played on the DVD-5900. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-5900. Do not attempt to play such discs, as they may damage the player. Holding Discs Avoid touching the surface of discs when loading and unloading them.
(1) Connecting to a TV • Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-5900’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT. S-Video output connector The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
Page 11
NOTES: • Use the three commercially available video cords to connect the DVD-5900’s color component output connectors to the TV or monitor. • Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is NTSC formated set to NTSC.
Page 12
(3) Connecting to a AV amplifier with a built-in decoder When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie theater or concert hall.
2 Sound output from the DVD-5900’s digital audio output connectors In the case of bit stream output Audio recording format Dolby Digital DVD video In the case of PCM output Audio recording format 48 kHz / 16 ~ 24 bit...
Page 14
“SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 33 ~ 35.) • With the DVD-5900, we recommend turning the digital output off and only outputting analog signals in order to keep interference from the digital output circuitry to the minimum and allow you to enjoy high bit, high sampling frequency, high quality multi-channel sound.
“LPCM (44.1kHz/48kHz)” “ON” Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers. DVD-5900 NOTE: • Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.
2 DENON LINK Second Edition: • With the DENON LINK, Second Edition (2nd), the audio signals are transferred from the DVD player to the AV amplifier in digital form, with the same quality as the signals recorded on the disc.
NOTES: • When DENON LINK is set, the down-mixed audio signals are output from the only front left and right terminals. To use the analog terminals, cancel the DENON LINK setting (set to “OFF”). • “AUDIO CHANNEL”, “DIGITAL OUTPUT”, “LPCM (44.1kHz/48kHz)”, “IEEE 1394”, “SOURCE DIRECT” and “BASS ENHANCER”...
Page 18
TV or Monitor with “component video output” or “S-video output” or “Video output”. (See pages 10, 11). • The “IEEE 1394 audio signal (A&M protocol)” output from the DVD-5900’s IEEE 1394 connector can only be received on AV equipment equipped with an IEEE 1394 connector.
AL24 processing Plus. DENON LINK indicator • This indicator lights when the audio signals are transferred by DENON LINK connections. IEEE 1394 indicator • This indicator lights when the audio signals are transferred by IEEE 1394 connections. (See page 37.) Disc tray •...
Control input connector (ROOM TO ROOM/IN) • This is the input connector for wired remote control. Consult your DENON dealer if you wish to use this connector. Control output connector (ROOM TO ROOM/OUT) • This is the output connector for wired remote control.
6 REMOTE CONTROL UNIT 2 The DVD-5900 can be controlled from a distance using the included remote control unit (RC-962). (1) Inserting Batteries q Remove the remote control unit’s rear cover. w Place two R6P/AA batteries in the battery compartment in the direction indicated by the marks.
ENGLISH (3) Names and Functions of Remote Control Unit Buttons 2 Button not explained here function in the same way as the corresponding buttons on the main unit. POWER ON/POWER OFF buttons Press this to switch the power between on and standby.
12 cm disc guide 8 cm disc guide Disc tray NOTE: • Do not move the DVD-5900 while a disc is playing. Doing so may scratch the disc. (1) Opening and Closing the Disc Tray q Turn on the power.
Use this to set the language for the default setting screen and messages displayed on the TV screen (“PLAY”, etc.). VIDEO SETUP Use this to set the DVD-5900’s screen mode. (TV aspect and TV type.) AUDIO SETUP Use this to set the DVD-5900’s audio output mode.
Page 25
VIDEO3 PICTURE SIZE SQUEEZE ZOOM AUDIO SETUP AUDIO CHANNEL MULTI CHANNEL 2 CHANNEL DIGITAL OUT NORMAL LPCM (44.1 kHz/48 kHz) DENON LINK IEEE1394 SOURCE DIRECT BASS ENHANCER RATINGS RATING LEVEL 0(LOCK ALL) 8(NO LIMIT) PASSWORD CHANGE OTHER SETUP PLAYER MODE...
Page 26
ENGLISH When “DISC SETUP” is selected See page 24. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. DIALOG Use this to set the language of the sound output from the speakers. SUBTITLE Use this to set the language of the subtitles displayed on the TV.
Page 27
w When “SUBTITLE” is selected: OFF (Factory default) Select this if you do not want to display the subtitles. (For some discs it is not possible to turn off the subtitle display.) ENGLISH Select this when you want to play the DVD with the subtitles in English.
When “OSD SETUP” is selected See page 24. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. OSD LANGUAGE Use this to set the language for the default setting screen and messages displayed on the TV screen (“PLAY”, etc.) WALL PAPER Use this to select the image to be shown on the screen in the stop mode...
Page 30
ENGLISH w When “WALL PAPER” is selected: BLUE (Factory default) Select this to display a blue background on the TV display. GRAY Select this to display a gray background on the TV display. BLACK Select this to display a black background on the TV display. PICTURE Select this to display the wallpaper on the TV display.
See page 24. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. TV ASPECT Use this to set the shape of your TV’s screen. TV TYPE Use this to set your TV’s video format (NTSC, PAL or MULTI). VIDEO OUT Use this to select either the progressive image output or interlace image output.
Page 32
ENGLISH e When “VIDEO OUT” is selected: (NOTES) PROGRESSIVE (Factory default) Select this when using the DVD-5900 connected to a progressive type INTERLACED Select this when using the DVD-5900 connected to an interlace type NOTE: • For the component output only, it is possible to switch between interlace image output and progressive image output.
Use this to set the digital audio output when playing DVDs recorded in linear PCM audio. DENON LINK Use this to output digital signals from the DENON LINK terminal. IEEE1394 Use this to output digital signals from the IEEE 1394 terminal.
Page 34
ENGLISH B When “MULTI CHANNEL” is selected, use the • and ª cursor buttons to select the item to be set, then press the ENTER button. SPEAKER CONFIGURATION Use this to select the types of the different speakers. CHANNEL LEVEL Use this to adjust the output level of the different speakers.
B When “DELAY TIME” is selected: With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.
Page 36
When “DENON LINK” is selected: OFF (Factory default) Digital audio signals are not output from the DENON LINK terminal. Set this when the amplifier to be connected is DENON LINK 2nd. t When “IEEE1394” is selected: OFF (Factory default) Digital audio signals are not output from the IEEE 1394 terminal.
Set this when you wish to control the operation of this unit from another device. B Audio Format Setting Method FORMAT 1 (Factory default) Set this when you conjunction with a DENON device. FORMAT 2 This is a mode for future system expansion. IEEE 1394 indicator When “IEEE 1394”...
ENGLISH ENGLISH When “RATINGS” is selected See page 24. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. RATING LEVEL Use this to restrict playback of adult DVDs you do not want children to view. Note that even with adult DVDs, viewing cannot be restricted unless the restriction level is recorded on the disc.
Page 39
Use the number buttons to input a 4-digit password, then press the ENTER button. The set’s password is set to “0000” by default. Do not forget the password. The setting cannot be changed without inputting the correct password. w When “PASSWORD” is selected: Use the cursor button to select the “CHANGE”, then press the ENTER button.
COMPRESSION Use this to set the dynamic range output when playing discs. AUTO POWER MODE To save power, DVD-5900’s can automatically be set to the standby mode when it is not used for long periods of time. SLIDE SHOW The time interval for switching to the next still picture when playing slide shows of still pictures (in JPEG format) can be set.
Page 41
OFF (Factory default) The power does not automatically switch to the standby mode. The DVD-5900’s power turns off and the standby mode is set if the DVD-5900 remains in the stop mode for approximately 30 minutes. t When “SLIDE SHOW” is selected: Use the •...
ENGLISH ENGLISH 9 PLAYBACK (1) Playback AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ¢ ON / STANDBY £ REMOTE SENSOR Turn on the power. • Press the power button, the power indicator lights and the power turns on.
Page 43
• Press the RETURN button during playback of a video CD to return to the menu screen. • If appears on the TV screen while buttons are being operated, that operation is not possible on the DVD-5900 or with that disc. • Set the disc in the disc guide. PLAY...
<Resume play memory function (DVD only)> • With the DVD-5900, when the STOP button is pressed, that position is stored in the memory. At this time, “ button is pressed after pressing the STOP button, playback resumes from the position at which it was stopped.
(5) Skipping to the Beginning of Chapters or Tracks Cueing using the SKIP buttons During playback, press one of the SKIP buttons on the main unit or the remote control unit. : Reverse direction (PREVIOUS) : Forward direction (NEXT) • A number of chapters or tracks equal to the number of times the button is pressed is skipped.
ENGLISH ENGLISH (8) Using the SRS TruSurround function (only for DVD-videos and Video CDs) 2 The multi-channel sound normally achieved with five speakers is recreated using only the two front stereo speakers. This results in a sound with a nearly natural sense of movement that seems to surround the head, without the strong directivity characteristic of multi-speaker systems.
Select the item that you wish to set and press the select knob to define it. (Exit the setting mode automatically.) PLAY STILL / PAUSE AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD OPEN / CLOSE REMOTE SENSOR (Displays the setting mode)
ENGLISH B When “PURE DIRECT” is selected: Turning the select knob will display the following setting modes on the display. NORMAL: (Factory default) All signals out. (Stop the direct mode) VIDEO OFF: Video signals are not output. DIGITAL OFF: Digital signals are not output. ALL OFF: No indicate in Display of the main unit, and video and digital signals are not output.
Select the memory using the 2 cursor buttons ( ) and press the ENTER button. IMAGE QUALITY ADJUSTMENT 1 This permits adjustment of the contrast, brightness, sharpness, tint, and enhancer. / Advance to Operation 3. IMAGE QUALITY ADJUSTMENT 2 This permits adjustment of the setup level, black level, white level, color density, chroma delay, and fresh color.
Page 50
ENGLISH When Noise Reduction (Adjustment 3) Is Selected and Adjusted: 3DNR (0 to +7) (Factory default: 0) • This reduces the noise of the overall image. BLNR (0 to +8) (Factory default: 0) • This reduces the block noise of the image. MQNR (0 to +8) (Factory default: 0) •...
Page 51
When the Display Position is Selected and Adjusted: • Press the cursor button (ª), then select the horizontal/vertical direction with the cursor buttons ( ), set the adjustment value with the (•, ª) cursor buttons, and press the ENTER button. SETUP LEVEL (0 IRE, 7.5 IRE) •...
ENGLISH 12 USING THE ON-SCREEN DISPLAY 2 Use this function to display and change information on the disc (titles, chapters, time, etc.) In the play mode, press the DISPLAY button. • The On-Screen Display appears. • The picture on the TV screen switches each time the button is pressed. •...
13 PLAYING REPEATEDLY 2 Use this function to play your favorite audio or video sections repeatedly. Playing Repeatedly (Repeat Playback) In the play mode, press the REPEAT button. • The display on the TV screen switches each time the button is pressed, and the corresponding repeat play mode or normal playback mode is set.
Page 54
ENGLISH Playing a Certain Section Repeatedly (A-B Repeat Playback) During playback, press the A-B button. • This sets start point A. Press the A-B button again. • This sets end point B, and repeat playback of the A-B section starts. To return to normal playback: Press the A-B button until “A TO B CANCELLED”...
2 Use this function with DVD-AUDIO discs, video CDs, Super audio CDs and music CDs to play the tracks in the desired order. 2 This function does not affect with DVD-VIDEO discs. AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ¢...
2 Use this function with video CDs, Super audio CDs and music CDs to play the tracks in random order. With DVD-AUDIO discs, random playback is performed within the selected group. 2 This function does not affect with DVD-VIDEO discs. AL24 PLUS DENON LINK IEEE 1394 POWER ON / STANDBY ¢...
16 PLAYING BACK WMA 2 Listening to WMA (Windows Media Audio) CD-R/CD-RW • This unit can play CD-R/RW music files that have been recorded in the WMA (Windows Media Audio)* audio compression format. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
2 There are many music distribution sites on the internet from which music files in MP3 format can be downloaded. Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the DVD-5900. If music recorded on commercially available music CDs is converted on a computer into MP3 files using an MP3 encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
Page 59
• The number of files playable with the DVD-5900 is approximately 600 or less. • With the DVD-5900 it is possible to display folder names and file names on the screen like titles. The DVD-5900 can display up to 8 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
ENGLISH 18 PLAYING STILL PICTURE FILES (JPEG FORMAT) 2 JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-5900. Playing still picture 2 Kodak picture CDs and Fujifilm Fujicolor CDs can be played on the DVD-5900.
Page 61
Use the • and ª cursor buttons to select the folder containing the file(s) you want to play, then press the ENTER button. To change the folder Use the cursor button to select “ROOT”, then press the ENTER button. The screen in step 1 reappears.
Page 62
• TRACK REPEAT (the select WMA or MP3 or JPEG file is played repeatedly) NOTES: • The DVD-5900 is compatible with image data stored in JPEG format, but Denon does not guarantee that all image data stored in JPEG format can be viewed.
19 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback. During playback, press the AUDIO button. • The current audio language number is displayed. Use the •...
ENGLISH Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. During playback, press the SUBTITLE button. • The current subtitle language number is displayed. Use the • and ª cursor buttons to select the desired language. •...
Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. During playback, press the ANGLE button. • The current angle number is displayed. Use the • and ª cursor buttons to select the desired angle. •...
ENGLISH 20 USING THE MENUS Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. During playback, press the TOP MENU button. • The top menu appears. Use the cursor or number buttons to select the desired title. •...
Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus.
ENGLISH 21 MARKING SCENES YOU WANT TO SEE AGAIN 2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want. Setting Marks (DVD-AUDIO / DVD-VIDEO) During playback, press the MARKER button. •...
22 PLAYING IN THE ZOOM MODE In the play or pause mode, press the ZOOM button. • The zoom rate increases each time the ZOOM button is pressed. For DVD video discs and video CDs: OFF Æ x1.5 Æ x2 Æ x4 Æ OFF For DVD audio discs: OFF Æ...
2 Are the amplifier and speakers operating properly ? If the DVD-5900 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD-5900 may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office.
: 2 Hz to 44 kHz (96 kHz sampling) : 2 Hz to 88 kHz (192 kHz sampling) : 2 Hz to 100 kHz : 2 Hz to 20 kHz : 120 dB : 110 dB DENON LINK connector, 1 set IEEE 1394 connector, 2 sets ENGLISH /ohms)
Page 72
Cable de alimentación ...1 1 CARACTERÍSTICAS 1. Conectores de transferencia digital El DVD-5900 se puede conectar a otro componente Denon compatible de transferencia digital (amplificador AV, etc.) por medio de un solo cable (incluido) para obtener un sonido digital de alta calidad con poca pérdida en la transferencia.
Page 73
8. Convertidor D/A de vídeo de 12 bits/216 MHz (NOTA 5) El DVD-5900 utiliza un convertidor D/A que lleva a cabo la conversión D/A de todas las señales de vídeo a 12 bits y permite un sobremuestreo 8X en el modo progresivo para conseguir la imagen de alta calidad que se les supone a los DVDs.
Page 74
ESPAÑOL 2 DISCOS • En el DVD-5900 pueden utilizarse los tipos de discos que figuran en la tabla que sigue a continuación. Las marcas están indicadas en las etiquetas o estuches de los discos. Discos Marca (logo) utilizables Vídeo DVD...
DVD-5900. Observe, sin embargo, que los disco con formas especiales (discos con forma de corazón, discos hexagonales, etc.) no se pueden reproducir en el DVD-5900. No intente reproducir tales discos, ya que podría dañar el reproductor. Manipulación de los discos Evite tocar la superficie de los discos al cargarlos y descargarlos.
Page 76
DVD-5900 S-VIDEO IN • Conecte las salidas de vídeo del DVD-5900 directamente a la televisión o a través de un amplificador AV. No lo conecte a través de un aparato de vídeo (VCR). Algunos discos contienen señales de prohibición de copia.
Page 77
• Utilice los tres cables de vídeo que pueden encontrarse en el mercado para conectar al televisor o al monitor los conectores de salida del componente de color del DVD-5900. • Ajuste “TIPO DE TV” de “CONFIGURACIÓN VÍDEO” de “CONFIGURACIÓN” para que concuerde con el formato del televisor. Cuando el televisor sea de formato NTSC, ajuste a NTSC.
Page 78
Dolby Digital o DTS. Si se conecta un decodificador Dolby Digital o DTS, se puede conseguir un sonido con potencia y sentido de presencia de un cine o una sala de concierto. DVD-5900 Altavoz frontal (izquierdo)
Page 79
2 Salida de sonido de los conectores de salida de audio digital del DVD-5900 En caso de salida de corriente de bits Formato de grabación de audio Dolby Digital Vídeo DVD En caso de salida PCM Formato de grabación de audio 48 kHz / 16 ~ 24 bit Vídeo DVD...
Page 80
• Con el DVD-5900, le recomendamos desactivar la salida digital y solo emitir señales analógicas con el fin de mantener las interferencias del sistema de circuitos eléctricos de la salida digital al mínimo y permitirle disfrutar de una alta velocidad de transferencia, alta frecuencia de muestreo, y sonido multicanal de gran calidad.
Page 81
“ON” La reproducción de DVDs con ajustes incorrectos puede producir ruidos que podrían dañar los oídos o los altavoces. DVD-5900 NOTA: • Las señales digitales de audio no se pueden emitir cuando se reproducen súper audio CDs. Utilice conexiones analógicas para grabar súper audio CDs.
2 DENON LINK Segunda edición: • Con el DENON LINK, segunda edición (2nd), las señales de audio se transfieren desde el reproductor de DVD hasta el amplificador en formato digital, con la misma calidad que las señales grabadas en el disco.
Page 83
• La configuración de los altavoces de la unidad DVD-5900 queda invalidada cuando se conecta el conector DENON LINK. • Con la conexión de segunda DENON LINK, las señales de Súper Audio CD no son emitidas en el conector DENON LINK. Utilice las terminales de salida de audio analógicas.
Page 84
4 pins con una longitud de 3,5 m o menos para S400 o superior. • La salida de “Señal de audio IEEE 1394 (Protocolo A&M)” del conector IEEE 1394 de la unidad DVD-5900 no produce señales de vídeo, conecte a un TV o monitor con “componente de salida de vídeo” o “salida de S-video” o “salida de vídeo”. (Véase las páginas 142 y 143).
AL24 Processing Plus. Indicador DENON LINK • Este indicador se ilumina cuando las señales de audio se transfieren mediante conexiones DENON LINK. Indicador IEEE1394 • Este indicador se ilumina cuando las señales de audio se transfieren mediante conexiones IEEE1394. (Véase la página 169.)
Conector de extracción digital (DENON LINK) • Se utiliza para la conexión de un amplificador AV vendido por separado y equipado con un conector Denon Link. • Utilícelo para conseguir sonido digital de alta calidad y poca pérdida de datos.
6 UNIDAD DE CONTROL REMOTO 2 El DVD-5900 puede ser controlado a distancia por medio de la unidad de control remoto incluido (RC-962). (1) Introducción de las pilas q Quite la tapa posterior de la unidad de control remoto. w Coloque dos pilas “AA” (R6P) ben el compartimiento de pilas, en la dirección indicadas por las marcas.
Page 88
ESPAÑOL (3) Nombres y funciones de los botones de la unidad de control remoto 2 Los botones que no se explican aquí, funcionan de la misma forma que los botones correspondientes situados en la unidad central. Botones POWER ON/POWER OFF Pulse este botón para conmutar la alimentación entre el modo activado y en espera.
Guía de discos de 8 cm Bandeja de discos NOTA: • No mueva el DVD-5900 mientras se está reproduciendo un disco. Si lo hace podría rayar el disco. (1) Apertura y cierre de la bandeja de discos q Active la alimentación.
(“LECTURA”, etc.). CONFIGURACIÓN VÍDEO Utilice para ajustar el modo de pantalla del DVD-5900 (aspecto del TV y tipo de TV) CONFIGURACIÓN DE AUDIO Utilice para ajustar el modo de salida de audio del DVD-5900 (ajustes de salida Digital y LPCM).
Page 91
TAMAÑO PANTALLA COMPRIMIDO ZOOM CONFIGURACIÓN DE AUDIO CANAL AUDIO MULTICANAL 2 CANALES SALIDA DE AUDIO NORMAL DIGITAL LPCM (44.1 kHz/48 kHz) LINK DENON IEEE1394 FUENTE DIRECTA REALCE GRAVES CLASIFICACIÓN NIVEL ACCESO 0(BLOQUEO) 8(SIN LÍMITE) CONTRASEÑA CAMBIO ACTUAL OTRAS CONFIGURACIONES MODO LECTOR...
Page 92
ESPAÑOL Cuando se ha seleccionado “CONFIGURACIÓN DISCO” Leer página 156. Utilice los botones de cursor • y ª para seleccionar el ajuste deseado y luego pulse el botón ENTER. DIÁLOGOS Utilice esta opción para ajustar el idioma de la salida de sonido desde los altavoces.
Page 93
w Cuando se seleccione “SUBTÍTULOS”: OFF (Por defecto de fábrica) Seleccione esto si no desea visualizar los subtítulos. (Para algunos discos no es posible desactivar la visualización del subtítulo.) INGLÉS Seleccione esta opción cuando desee reproducir el DVD con los subtítulos en inglés.
ESPAÑOL Lista de códigos de idiomas Code Language Code 6565 Afar 7079 6566 Abkhazian 7082 6570 Afrikaans 7089 6577 Ameharic 7165 6582 Arabic 7168 6583 Assamese 7176 6588 Aymara 7178 6590 7185 Azerbaijani 6665 Bashkir 7265 6669 Byelorussian 7273 6671 Bulgarian 7282 6672...
Page 95
Cuando se ha seleccionado “CONFIGURACIÓN OSD” Leer página 156. Utilice los botones de cursor • y ª para seleccionar el ajuste deseado y luego pulse el botón ENTER. LENGUAJE OSD Utilice este idioma para ajustar el idioma de la pantalla de ajuste por defecto y los mensajes visualizados en la pantalla del televisor (“PLAY”, etc.) FONDO MENU Utilice esto para seleccionar la imagen que se ha de ver en la pantalla en...
Page 96
ESPAÑOL w Cuando se seleccione “FONDO MENU”: AZUL (Por defecto de fábrica) Seleccione éste para visualizar un fondo azul en la pantalla. GRIS Selecciónelo para mostrar un fondo gris en la pantalla de televisión. NEGRO Selecciónelo para mostrar un fondo negro en la pantalla de televisión. IMAGEN Seleccione éste para visualizar el papel de empapelar en la pantalla.
Leer página 156. Utilice los botones de cursor • y ª para seleccionar el ajuste deseado y luego pulse el botón ENTER. ASPECTO DE TV Utilice esto para ajustar la forma de la pantalla del televisor. TIPO DE TV Utilice esta opción para ajustar su formato de video de TV (NTSC, PAL o MULTI).
Page 98
ESPAÑOL e Cuando se seleccione “SALIDA VÍDEO”: (NOTAS) PROGRESIVA (Por defecto de fábrica) Seleccione este cuando use el DVD-5900 conectado a un televisor de tipo progresivo. ENTRELAZADA Seleccione este cuando use el DVD-5900 conectado a un televisor de tipo entrelazado.
Page 99
Utilice esta para seleccionar el formato de señal ’de la salida digital. LPCM (44.1 kHz/48 kHz) Utilice esta opción para ajustar la salida de audio digital cuando reproduzca DVDs grabados en audio lineal PCM. LINK DENON Utilice esta opción para las señales digitales de salida del terminal DENON LINK. IEEE1394 Utilice esta opción para las señales digitales de salida del terminal...
Page 100
ESPAÑOL B Cuando se seleccione “MULTICANAL”, utilice los botones de cursor • y ª para seleccionar el elemento que desee ajustar, después pulse el botón ENTER. CONFIG. ALTAVOCES Utilice esta opción para seleccionar los tipos de los diferentes altavoces. NIVEL CANALES Utilice esta opción para ajustar el nivel de salida de los diferentes altavoces.
Page 101
B Cuando se seleccione “TIEMPO DE RETARDO”: Con un sonido surround canal 5.1, la distancia ideal entre la posición de escucha y todos los altavoces aparte del potenciador de graves debería ser la misma. El ajuste del tiempo de retraso puede utilizarse para hacer que el sonido de los diferentes altavoces alcance la posición de escucha al mismo tiempo.
Page 102
Cuando realice las conexiones digitales a un amplificador AV que no sea compatible con las señales de 96 kHz/88,2 kHz, ajuste a “ON”. r Cuando se seleccione “LINK DENON”: OFF (Por defecto de fábri ca) No se pueden extraer señales de audio digital desde el terminal DENON LINK.
Page 103
B Reproducción Automática Establezca esta opción cuando reproduzca de forma automática esta unidad desde otro dispositivo, en circunstancias en las que esta unidad se utilice junto con un dispositivo DENON que utilice IEEE1394. B Formato de audio Establece este formato de señales de audio recibidas desde el conector IEEE1394.
ESPAÑOL Cuando se ha seleccionado “CLASIFICACIÓN” Leer página 156. Utilice los botones de cursor • y ª para seleccionar el ajuste deseado y luego pulse el botón ENTER. NIVEL ACCESO Utilice esta opción para restringir la reproducción de DVDs para adultos, que no desea que sean vistos por niños.
Page 105
Utilice los botones de numéricos para introducir una contraseña de 4 cifras y luego pulse el botón ENTER. La contraseña ajustada, se ajustará a “0000” por defecto. No olvide la contraseña. Una vez que sea bloqueado, el ajuste no se podrá cambiar a menos que se introduzca la contraseña correcta.
Page 106
Utilice esta opción para ajustar el margen de la salida de sonido cuando reproduzca discos. MODO AUTO DESCONEXIÓN Para ahorrar energía, el DVD-5900 puede ser ajustado automáticamente para que pase a modo de pausa cuando no se utilice durante largos periodos de tiempo.
Page 107
OFF (Por defecto de fábrica) La alimentación de la unidad no cambia automáticamente al modo de pausa. La alimentación del DVD-5900 se apaga y se pasa al modo de pausa si el DVD-5900 permanece en modo parado durante aproximadamente 30 minutos.
Page 108
ESPAÑOL 9 REPRODUCCIÓN (1) Reproducción AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ¢ ON / STANDBY £ REMOTE SENSOR Encienda la alimentación. • Pulse el botón d’alimentación, se iluminará el indicador de alimentación y ésta se activará.
Page 109
Pulse el botón PLAY. • Para muchos DVDs interactivos y CDs de vídeo. En este caso siga el procedimiento del paso 6 para seleccionar la función deseada. Los DVDs interactivos son DVDs que incluyen múltiples ángulos, historias, etc. Utilice los botones de cursor (•, ª, la función deseada.
<Función de reanudación de la memoria de reproducción (sólo DVD)> • En el DVD-5900, cuando se pulsa el botón STOP, la posición es almacenada en memoria. Cuando se pulsa el botón PLAY después de pulsar el botón STOP, la reproducción se reanudará...
Page 111
(5) Salto al comienzo de capítulos o pistas Dar entrada utilizando los botones SKIP Durante la reproducción pulse uno de los botones SKIP de la unidad principal o de la unidad de control remoto. : Dirección hacia atrás (ANTERIOR) : Dirección hacia adelante (SIGUIENTE) •...
Page 112
ESPAÑOL (8) Uso de la función SRS TruSurround ((únicamente para discos de vídeo DVD y CDs de 2 El sonido multicanal que se obtienen normalmente con cinco altavoces se reproduce utilizando solo los dos altavoces estéreo delanteros. Esto da como resultado un sonido con una percepción casi natural de movimiento que parece rodear la cabeza, sin la fuerte directividad que es característica en los sistemas de múltiples altavoces.
Page 113
Seleccione el elemento que desee ajustar y pulse el botón select para definirlo. PLAY STILL / PAUSE AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD OPEN / CLOSE REMOTE SENSOR (Muestra el modo de configuración)
ESPAÑOL B Cuando se selecciona la opción “PURE DIRECT”: Si gira el botón select, aparecerán estas opciones en el visualizador. NORMAL: (Por defecto de fábrica) Sin señales (detiene el modo directo). VIDEO OFF: No salen las señales de vídeo. DIGITAL OFF: No salen las sales digitales.
Page 115
Seleccione la memoria utilizando los dos botones del cursor ( ) y pulse el botón ENTER. AJUSTE DE LA CALIDAD DE LA IMAGEN 1 Permite ajustar del contraste, el brillo, la intensidad, el tono y la mejora. / Pase a la Operación 3.
Page 116
ESPAÑOL Cuando selecciona y ajusta la Reducción de Ruido (AJUSTE 3): 3DNR (0 a +7) (Por defecto de fábrica: 0) • Reduce el ruido de la imagen global. BLNR (0 a +8) (Por defecto de fábrica: 0) • Reduce el ruido de bloque de la imagen. MQNR (0 a +8) (Por defecto de fábrica: 0) •...
Page 117
Cuando la Posición del Visualizador se selecciona y ajusta: • Pulse el botón del cursor (ª), a continuación, seleccione la dirección horizontal/vertical con los botones del cursor ( )), seleccione el valor de ajuste con los botones del cursor (•, ª) y pulse el botón ENTER.
ESPAÑOL 12 USO DE LA VISUALIZACIÓN EN ON-SCREEN 2 Utilice esta función para visualizar y cambiar la información de los discos (títulos, capítulos, hora, etc.) Estando en el modo de reproducción, pulse el botón DISPLAY. • Aparece la visualización en On-Screen. •...
13 REPRODUCCIÓN REPETIDAMENTE 2 Utilice este función para reproducir las secciones de audio o vídeo favoritas repetidamente. Reproducción repetidamente (Repetición de Reproducción) Estando en el modo de reproducción, pulse el botón REPEAT. • La visualización en la pantalla de TV cambia cada vez que se pulsa el botón, y se puede ajustar el modo de reproducción repetida o el modo reproducción normal correspondiente.
Page 120
ESPAÑOL Reproducción de una sección determinada repetidamente (Repetición de reproducción A–B) Durante la reproducción pulse el botón A-B. • Esto ajustará el punto de comienzo A. Pulse el botón A-B nuevamente. • Esto ajustará el punto B y comenzará la repetición de reproducción de la sección A-B.
2 Utilice esta función con discos de audio DVD, CDs de vídeo, súper audio CD y CDs de música para reproducir las pistas en el orden deseado. 2 Esta función no se utiliza con discos de vídeo DVD. AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ¢...
2 Utilice esta función con CDs de vídeo, súper audio CD y CDs de música para reproducir las pistas en orden aleatorio. Con los discos DVD-AUDIO, la reproducción aleatoria se lleva a cabo dentro del grupo seleccionado. 2 Esta función no se utiliza con discos de vídeo DVD. AL24 PLUS DENON LINK IEEE 1394 SUPER AUDIO CD POWER ON / STANDBY ¢...
16 REPRODUCCIÓN DE WMA 2 Escuchar un CD-R/CD-RW de WMA (Windows Media Audio) • Esta unidad puede reproducir archivos de música CD-R/RW que hayan sido grabados en el formato de compresión de audio de WMA (Windows Media Audio)*. Windows Media y el logotipo Windows son marcas registradas de Microsoft Corporation en Estados Unidos y/o el resto de países.
Page 124
Cargue el disco CD-R/RW en el que se hayan escrito ficheros de música en formato MP3 en el DVD-5900. (Véase la página 155). • Cuando se cargue el disco en el DVD-5900, aparecerá la pantalla de información del disco. • Si hubielran múltiples carpetas, salte al paso 2.
Page 125
• En general, mientras mayor sea la velocidad de bits de ’un fichero MP3, mejor será la calida del sonido. En el DVD-5900, se recomienda utilizar ficheros MP3 grabados a velocidades de bits de 128 kbps o más.
Reproducción de imágenes fijas 2 Los CDs Kodak picture y los CDs Fujifilm Fujicolor se pueden reproducir en el DVD-5900. Durante la reproducción de un CD (con imágenes fijas grabadas), las fotografías contenidas en el CD pueden visualizarse en un aparato de televisión.
Page 127
Utilice los botones de cursor • y ª para seleccionar la carpeta que contenga el fichero(s) que desea reproducir y luego pulse el botón ENTER. Para cambiar la carpeta Utilice los botones de cursor para seleccionar “ROOT”, a continuación, pulse el botón ENTER. Reaparecerá...
Page 128
• REPETICIÓN DE PIST (se reproduce de forma repetida el archivo WMA o MP3 o JPEG seleccionado) NOTAS: • El DVD-5900 es compatible con información de imagen almacenada en formato JPEG, pero Denon no garantiza que puedan verse todas las imágenes guardadas en formato JPEG.
19 UTILIZACIÓN DE LAS FUNCIONES DE AUDIO, SUBTITULADO Y ÁNGULO MÚLTIPLES Cambio del idioma del audio (Función de audio múltiple) 2 En los DVDs que contienen señales de audio múltiple, es posible cambiar el idioma del audio durante la reproducción. Durante la reproducción, pulse el botón AUDIO.
Page 130
ESPAÑOL Cambio del idioma de los subtítulos (Función de subtitulado múltiple) 2 En los DVDs que contengan señales de idioma de subtítulos múltiples, es posible cambiar el idioma de los subtítulos durante la reproducción. Durante la reproducción, pulse el botón SUBTITLE. •...
Page 131
Cambio del ángulo (Función de ángulo múltiple) 2 En los DVDs que contenga señales de ángulo múltiple, es posible cambiar el ángulo durante la reproducción. Durante al reproducción, pulse el botón ANGLE. • A continuación se visualizará el número de ángulo seleccionado. Utilice los botones de cursor •...
ESPAÑOL 20 UTILIZACIÓN DE LOS MENÚS Utilización del menú superior 2 Para los DVDs que contengan múltiples títulos, desde el menú superior puede seleccionarse y reproducirse el título deseado. Durante la reproducción, pulse el botón TOP MENU. • Aparece el menú superior. Utilice los botones de cursor o numéricos para seleccionar el título deseado.
Utilización del menú DVD 2 Algunos DVDs incluyen menús especiales denominados menús DVD. Por ejemplo, los DVDs con contenidos complejos, pueden incluir menús guías, y los DVDs con idiomas múltiples pueden contener menús de idioma del audio y de los subtítulos. Estos menús se denominan “menús DVD”.
ESPAÑOL 21 MARCADO DE ESCENAS QUE DESEE VER DE NUEVO 2 Coloque marcas en las escenas que desee ver de nuevo, de modo que pueda iniciar la reproducción desde la posición marcada siempre que quiera. Colocación de marcas (DVD-AUDIO / DVD-VIDEO) Durante la reproducción, pulse el botón MARKER.
22 REPRODUCCIÓN EN MODO ZOOM En el modo de reproducción o de pausa, pulse el botón ZOOM. • El grado del zoom aumenta cada vez que se pulsa el botón ZOOM. Para discos de DVD vídeo y CDs de vídeo: OFF Æ...
Si el DVD-5900 pareciera no estar funcionando correctamente, compruebe la tabla siguiente. Si esta operación no solucionara el problema, puede que el DVD-5900 tuviera alguna avería. Desactive la alimentación, desenchufe el cable de alimentación de la toma de red general, y póngase en contacto con la tienda de compra o con la oficina de ventas DENON más próxima.
Need help?
Do you have a question about the DVD-5900 and is the answer not in the manual?
Questions and answers