Changing The Default Settings - Denon DVD-5910 Operating Instructions Manual

ENGLISH

8 CHANGING THE DEFAULT SETTINGS

2 Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
ON / STANDBY
1 1
Turn on the power.
• Press the power button, the power indicator lights green
and the power turns on.
When pressed again, the power turns off and indicator is
1
off.
• In the standby mode (the power indicator lights red), press
the ON/STANDBY button on the main unit or POWER ON
button on the remote control unit (RC-993).
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE: For some menus, the initial values can be changed
during playback.
LANGUAGE SETUP
Use this to set the language to be used when playing the
disc. If the set language is not offered on that disc, the discs
default language is set.
And use this to set the language for the default setting screen
and messages displayed on the TV screen ("PLAY", etc.).
2
DIGITAL INTERFACE SETUP
Use this to set the output of DVI, HDMI, DENON LINK and
IEEE1394 terminals.
VIDEO SETUP
Use this to set the DVD-5910's screen mode. (TV aspect and
TV type.)
AUDIO SETUP
Use this to set the DVD-5910's audio output mode.
(Digital and LPCM output settings.)
Use the and
0
item, then press the ENTER button.
Select "LANGUAGE SETUP". (See pages 30 ~ 32. )
Select "DIGITAL INTERFACE SETUP". (See pages 33 ~ 37 )
3
Select "VIDEO SETUP". (See pages 37 ~ 39. )
Select "AUDIO SETUP". (See pages 40 ~ 44. )
Select "RATINGS". (See pages 45 , 46.)
Select "OTHER SETUP". (See pages 47 ~ 49. )
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the "ENTER" button. It is also possible to quit by pressing the
"SETUP" button on the remote control unit.
OPEN/CLOSE
cursor buttons to select the desired setting
1
PLAY STOP
STILL / PAUSE
VIDEO MODE
HDMI / DVI SUPER PURE
SELECT FORMAT AUDIO CD DIRECT
SET UP SELECT
PUSH ENTER
DVD-5910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
(Green)
(Red)
RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs cannot
be disabled if the rating level is not recorded on the DVD.
OTHER SETUP
These include special settings such as CAPTIONS, WALL
PAPER , etc,.
SETUP
Remote control unit
Remote control unit
1
SELECT FORMAT NTSC/PAL
ANGLE SUBTITLE AUDIO
3
2
SETUP PICT ADJ. MEMORY SELECT
ON / STANDBY ON / STANDBY
Main unit
ON / STANDBY ON / STANDBY
POWER ON
Main unit Remote control unit
L ANGUAGE SE TUP
D I AL OG ENGL I SH
SUBT I T L E
D I SC MENUS ENGL I SH
ENGL I SH
OSD LANGUAGE
E X I T SE TUP
SE L EC T : DEC I S I ON : ENTE R BUT TON
Remote control unit
ENGLISH
OFF
27