Using The Pure Direct Mode; Using The Super Audio Cd Setup; Adjusting The Picture Quality - Denon DVD-2910 Operating Instructions Manual

ENGLISH
9

USING THE PURE DIRECT MODE

In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high
2
quality sound.
OPEN/CLOSE
Display the setting mode
Press the PURE DIRECT MEMORY button on the
remote control unit.
1
• The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
Use the • and ª cursor buttons to select the mode,
then press the ENTER button.
DIGITAL OUTPUT
ON: Digital audio signals are output.
OFF: Digital audio signals are not output.
VIDEO OUT
ON: Video signals are output.
OFF: Video signals are not output.
2
DISPLAY
ON: It is indicate in Display of the main unit.
OFF: It is not indicate in Display of the main unit.
When the video output is set to "OFF" or "ALL
OFF", neither HDMI video nor audio signals are
output. Also, when the HDMI AUDIO SETUP is
set to "MULTI (NORMAL)", the digital output
setting cannot be made. (See page 17.)
Press the PURE DIRECT MEMORY button on the
3
remote control unit.
• All of the settings are stored in the memory.
Press the PURE DIRECT SELECT button on the
main unit.
The modes described below will appear on the
display.
NORMAL: All signals are output normally.
MODE 1: The settings stored for MODE 1 are
used.
4
The factory default settings are:
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
MODE 2: The settings stored for MODE 2 are used.
The factory default settings are:
24
PLAY STOP
STILL / PAUSE
SUPER PURE
AUDIO CD DIRECT HDMI / DVI
SETUP SELECT SELECT FORMAT
DVD-2910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
2
4
1, 3
4
PURE DIRECT MEMORY
SE TUP
PURE D I RE CT MODE
PURE DIRECT
MEMORY SELECT
PURE D I R ECT MODE 1
DI G I T AL OUTPUT
V I DEO OUT
DI SPL AY
Remote control unit
SE L ECT :
PURE DIRECT MEMORY
SE TUP
PURE D I RE CT MODE
PURE D I R ECT MODE 1
DI G I T AL OUTPUT
V I DEO OUT
DI SPL AY
Remote control unit
SE L ECT :
Remote control unit
PURE DIRECT
MEMORY SELECT
Remote control unit
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
ALL OFF: No indicate in Display of the main
unit, video and digital signals are not
out.(except analog audio output)
PURE
DIRECT PURE DIRECT
MEMORY
Main unit Remote control unit
10

USING THE SUPER AUDIO CD SETUP

On a Super Audio CD, the stereo and multi – channel areas are separate.
2
Hybrid discs comprise 2-layer structure of Super Audio CD layer and a CD layer.
The area/layer can be set to be played with priority.
ON / STANDBY
Display the setting mode
Press the SUPER AUDIO CD SETUP button.
• The modes described below will appear on the
display.
MODE1
MULTI (FACTORY DEFAULT)
MODE2
When playing a Super Audio CD disc, the multi
ON
– channel area will be played back with priority.
ON
STEREO
ON
When playing a Super Audio CD disc, the
1
stereo area will be played back with priority.
CD
DEC I S I ON : ENTER BUT TON
When playing a Super Audio CD disc, the CD
layer will be played back with priority.
When playing back a disc that does not
have a selected area/layer, another
area/layer
automatically.
MODE1
ON 11

ADJUSTING THE PICTURE QUALITY

OFF
DEC I S I ON : ENTER BUT TON
Press the PICTURE ADJUST button during
playback or during pause.
• The image quality adjustment screen will
appear.
STD
Returns the settings to the factory default
settings.
1
M1 TO M5
Image quality settings that have been adjusted
to your preference can be stored to 5
SELECT
memories, M1 to M5.
SET
SET permits set to setup level and setting of
the screen display position (horizontal and
vertical).
PLAY STOP
OPEN/CLOSE
STILL / PAUSE
SUPER PURE
HDMI / DVI
AUDIO CD DIRECT
SETUP SELECT SELECT FORMAT
DVD-2910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
1
SUPER
AUDIO CD
SETUP
Main unit
SUPER AUDIO
CD SETUP
Remote
will be played back
control unit
1
2, 3, 4, 5, 6
PICTURE
ADJUST
Remote control unit
1
MULTI
STEREO
CD
P I CTURE MODE
STD M1 M2 M3 M4 M5 SET