2.3.2 Removal of 168-pin DIMM
1. Press the holding clips on both sides of the socket outward to release the DIMM.
2. Gently pull the DIMM out of the socket.
2.3.3 Memory Configuration
There is no jumper setting required for the memory size or type. It is automatically detected by the system BIOS, and the
total memory size is to add them together.
DIMM Socket
DIMM1
DIMM2
DIMM3
2.4 I/O Connections/Panel Connections
I/O Connections
J2
ATX Power Connector
JFAN1
CPU fan connector
JIR1
IrDA Connector ( Cable optional )
JFLP1
Floppy Disk Drive Connector
IDE1, 2
Primary/ Secondary IDE Connectors
JMOUSE1
PS/2 Mouse Port
JKB1
PS/2 Keyboard Connector
JCOM1, 2
Serial Ports 1 & 2
JPRT1
Printer Port
USB1, 2
USB Connector
JWOL
Wake up on LAN connector
SB_LINK
For link with Creative's Sound Blaster 16
2.4.1 ATX Power Connector (20-pin J2)
Make sure that the power supply is off before connecting or disconnecting the power cable.
2.4.2 CPU Fan Connectors (3-pin FAN)
Connect the fan's plug to the board taking into consideration the polarity of the connector
DIMM Modules
EDO/SDRAM 8, 16, 32, 64, 128MB
EDO/SDRAM 8, 16, 32, 64, 128MB
EDO/SDRAM 8, 16, 32, 64, 128MB