4.2.7
Floppy Drive B
This parameter specifies the type of drive designated as Floppy Drive B. The
default setting is None.
4.2.8
IDE Primary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the primary IDE channel. The default setting is CD-ROM.
4.2.9
IDE Primary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the primary IDE channel. The default setting is None.
4.2.10 Total Memory
This parameter specifies the total system memory.
automatically detected by BIOS during the POST.
memory, the system automatically adjusts this parameter to display the new
memory size.
1st Bank/2nd Bank/3rd Bank/4th Bank
These parameters indicate the type of memory installed in the system.
default setting for the first bank is EDO, and for the second, third, and fourth
banks the default setting is None.
Altos 21000 Series User's Guide
The memory size is
If you install additional
The