Ide Secondary Channel Slave; Total Memory; 1St Bank; 2Nd Bank - Acer 930 Bios Manual

2.2.11

IDE Secondary Channel Slave

This parameter specifies the current configuration of the IDE device
connected to the slave port of the secondary IDE channel. For information
on how to configure IDE devices, see section 2.4.2.
2.2.12

Total Memory

This parameter specifies the total system memory. The memory size is
automatically detected by BIOS during the POST. If you install additional
memory, the system automatically adjusts this parameter to display the new
memory size.

1st Bank

This parameter indicates the type of DRAM installed in bank 1. The
setting indicates that there is no DRAM installed. For the location of bank
1, refer to Figure 1-2.

2nd Bank

This parameter indicates the type of DRAM installed in bank 2. The
setting indicates that there is no DRAM installed. For the location of bank
2, refer to Figure 1-2.

3rd Bank

This parameter indicates the type of DRAM installed in bank 3. The
setting indicates that there is no DRAM installed. For the location of bank
3, refer to Figure 1-2.

4th Bank

This parameter indicates the type of DRAM installed in bank 4. The
setting indicates that there is no DRAM installed. For the location of bank
4, refer to Figure 1-2.
2.2.13 Serial Port 1
This parameter indicates the serial port 1 address and IRQ setting.
2-6
None
None
None
None
User's Guide