Camera Installation - FLIR DNE14TL2 Instruction Manual

3. CAMERA INSTALLATION

Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
1. Use the camera base to
mark and drill holes for the
mounting screws.
2. Mount the camera base to
the surface using the
mounting screws (4x).
3. Feed the cables through the
camera base and then
connect the cables. Position
the dome cover over the ball
camera and screw it
clockwise half way onto the
camera base.
1
2
3
Camera Installation
Mounting
Points
Camera base
Mounting
screws
Camera base
Dome camera
Ball camera
5