FLIR DNE14TL2 Instruction Manual page 47

2. Under Disk Name, select ftp.
3. Click Modify. The Record Disk Path opens.
4. Check Enable.
5. Configure the following:
• IP: Enter the FTP server address.
• Port: Enter the FTP port number.
• Accounts: Enter the FTP account user name.
• Password/Confirm Password: Enter the FTP password.
• Free Space: Enter the amount of space (in MB) you would like to make
available on the FTP server for recording.
Web Configuration
Select ftp
Click Modify
Check Enable
Configure FTP
server information
Click OK
39