FLIR DNE14TL2 Instruction Manual page 23

5. Your Account information will be sent to you at the email address you
used in Step 2. Record your Account Information below.
Domain Name:
User Name:
Password:
Step 5 of 6: Enable DDNS on the camera:
1. Enter the camera's IP address in your web browser. Log in and then click
Network Service>DDNS.
2. Check Enable DDNS.
3. Configure the following:
• Provider: Select FLIRDDNS.
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
tomsmith.myddns-flir.com
(e.g.
• User Name: Enter the User Name you received in the confirmation email.
• Password: Enter the Password you received in the confirmation email.
4. Click OK to save settings.
Step 6 of 6: Connect to the camera's DDNS address:
1. Enter the camera's DDNS address in your web browser in the following
format:
http://
http://tomsmith.myddns-flir.com:80
2. Under User Name and Password, enter the camera's User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
Syncro-V, or other VMS software.
).
DDNS address
Configuring Remote Connection
Colon
HTTP port number
15