Image Adjust; Shutter Control - FLIR DNE14TL2 Instruction Manual

• Click Save to save setting changes.
• Click Reset to revert to the last saved changes.
• Click Factory Setting to revert all camera sensor settings to factory
defaults.
• Click Cancel to exit.
TIP: Hold the mouse over the tabs to see the full name of the tab.

6.17.1 Image Adjust

Adjust the Brightness, Saturation, and Contrast settings for the image.

6.17.2 Shutter Control

Adjust the camera shutter settings.
• ShutterMode: Select AutoShutter or FixedShutter.
Web Configuration
53