FLIR DNE14TL2 Instruction Manual page 51

The Record Policy menu allows you to set the microSD/SD memory card,
NAS, and FTP recording parameters. Once configured, the device can record
video directly to a microSD/SD card, NAS, and FTP.
To enable recording to microSD/NAS/FTP:
1. Click Local Record>Record Policy.
2. Configure recording storage locations in the Record Directory sub-menu.
See "6.9.1 Record Directory" on page 37.
NOTE: The camera will simultaneously record to all storage locations that
have been enabled in Record Directory.
3. To enable scheduled or continuous recording, check Enable under
Schedule Record. Select 7*24 H Record to record video continuously at
all times, or, select Schedule Record to create a schedule for recording.
• If you select Schedule Record, click Schedule and configure recording
times. The schedule is divided into 3 periods, and the camera will record
during all selected times in all 3 periods. Click OK when finished
configuring the recording schedule.
4. To enable Motion Alarm Recording, check Enable under Alarm Record.
Configure Pre-recording and Post-recording times. Check Motion
Alarm, Channel.
5. Under Stream, select the stream to use for recording. Stream1 is
recommended if you want to record high quality video, stream2 is
recommended if you want to save bandwidth or storage space.
6. Check Record Audio to enable audio recording.
7. Under Storage Rule, select Cycle Write to enable the camera to
overwrite the oldest recorded data once the available space in the
storage location is filled. Or, select Save Days to save video for a set
Web Configuration
43