FLIR DNE14TL2 Instruction Manual page 28

Web Configuration
3. Under Download unsigned ActiveX controls, click Prompt
(recommended) or Enable.
4. Click OK. Click OK again to save changes.
Step 2 of 2: Log into camera:
1. Connect the camera to your local network and find the camera's IP
address. See "4. Finding the Camera's IP Address" on page 8.
2. Enter the camera's IP address in the address bar in the following format:
http://
http://192.168.0.120:80
NOTE: You can also connect to the camera using a DDNS address (DDNS
setup and port forwarding required; see "5. Configuring Remote
Connection" on page 12 for details).
3. Under User Name and Password, enter the camera's User Name
(default: admin) and Password (default: admin) and click Login.
20
Select Enable or Prompt under
Download unsigned ActiveX controls
Click OK
IP address
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Colon
HTTP port number