Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
When attaching the Panel Gear to the Panel Unit, align the
protrusion of the Panel Unit with the groove of the Panel Gear.
Rear of Panel Unit
Panel Unit
Protrusion and groove
Figure 4-24. Installing the Panel Unit (1)
DISASSEMBLY AND ASSEMBLY
Panel Gear
Removal of Exterior Parts
When installing the Panel Unit, make sure to engage the point
A and B of the Panel Gear with the M/B Cover properly as
shown below.
Point A: Insert the ribs (x3) of the Panel Gear to the grooves
(x3) of the M/B Cover.
Point B: Insert the small box of the Panel Gear to the hole
of the M/B Cover.
M/B Cover
Panel Unit
Point B
Panel Gear
Figure 4-25. Installing the Panel Unit (2)
When installing the Pane Unit, align the positioning holes (x2
each) of the Panel Hinges with the dowels (x2 each) of the M/B
Covers.
(See Figure 4-23.)
Make sure that the Panel Unit moves smoothly after installing
the Panel Unit.
Revision C
Rear of point A
Panel Gear
Point A
Rib
Groove
Small box
Panel Gear
Hole
73
Confidential