Epson Stylus Photo PX650 Service Manual page 33

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
1.7.6.2 Ink Levels
The current ink levels of each of the cartridges are displayed in bar chart by the rules
described below. After displaying the ink levels, the next operation to change the ink
cartridge can be performed with "Change Cartridge".
• The bar chart is displayed in the order of yellow, black, light cyan, light
magenta, magenta, and cyan from the left.
• When initial ink charge is completed, or after replacing the cartridge, the ink
level becomes 100% (full).
• The ink level is indicated in increment of 1%. Lower than 1% is rounded
down.
• When the ink level becomes lower than 10%, "!" icon appears to notify the
user of the ink low status.
1.7.6.3 PictBridge Setup
The print settings to be used for the camera direct print (PictBridge) can be specified.
When print settings (paper type, paper size, layout, quality, auto correct) are specified
from the DSC, the DSC settings are applied and the settings made here are ignored. For
more details, see "1.7.4 Camera Direct Print Function (PictBridge)
1.7.6.4 CD/Sticker Print Position
The printing range when printing on a CD/DVD or a sticker can be adjusted.
1.7.6.5 Backup Memory Card
This menu allows the user to make a backup copy of a memory card on media in an
external device. The "Folder Select" displays a folder selection screen to select the
target folder in an external media to be printed.
The "Folder Select" menu item is disabled (grayout) in the following cases.

When any external device is not connected

When no image files is detected in the inserted memory card.
See "1.7.3 Backup Function (p.26)" for more information on the backup function.
1.7.6.6 Restore Default Settings
This menu allows to restore the default settings of the panel settings.
PRODUCT DESCRIPTION
1.7.6.7 Bluetooth Settings
Bluetooth communication settings can be configured. This menu is enabled only when
the optional Bluetooth unit is connected.
Item
BT PIN Code Set
BT Printer ID Set
(p.28)".
BT Mode
BT Encryption
BT Device Address
Specifications of Each Function
Table 1-33. Bluetooth Settings Sub Menus
Explanation
Sets the passkey to request to an external device when accepting the
communication request from the device. The setting range is 0000 to
9999.
Sets the printer ID to be identified in the Bluetooth communication
when multiple same models exist. Enter a one-digit number (1 to 9, 0)
to be appended as a suffix to the printer name. The change does not
take effect until the printer is rebooted.
Selects the BT communication mode from the following three
options.
• Discoverable
Allows an external device to search for the printer and the
connection can be established.
No authentication or passkey request is made by the printer.
• Not Discoverable
Does not allow an external device to search for the printer but the
connection can be established.
No authentication or passkey request is made by the printer.
• Pairing
Allows an external device to search for the printer and the
connection can be established.
The printer requests a passkey to the device. Once the connection is
established, the printer remembers the device (only one device can
be remembered), and does not request a passkey for the second or
later access of the device.
When this is set to "On", the Bluetooth communication data is
encrypted and the printer requests device authentication.
The physical address (unique value) of the Bluetooth module is
displayed. The address is displayed in hexadecimal 12-digit numbers
(xx-xx-xx-xx-xx-xx).
Revision C
33
Confidential