Epson Stylus Photo PX650 Service Manual page 82

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
6. Disconnect the Panel FFC (CN1) from the connector on the Panel Board.
7. Disconnect the LCD FFC (CN2) from the connector on the LCD Unit.
8. Remove the screws (x6) that secure the Panel Board, and remove the Panel Board
from the Panel Upper Housing.
Connect FFC with the longer
folded side to LCD Unit.
Panel Board
LCD Unit
Panel Upper Housing
Figure 4-45. Removing the Panel Board (4)
9. Remove the screws (x2) that secure the LCD Unit, and remove the LCD Unit from
the Panel Upper Housing.
Panel Upper Housing
LCD Unit
Figure 4-46. Removing the Panel Board (5)
DISASSEMBLY AND ASSEMBLY
LCD FFC
CN2
CN1
Panel FFC
Positioning hole and dowel
C.B.P. 3x8 (6±1 Kgfcm)
1
2
C.B.P. 2x8 (1.5±0.5 Kgfcm)
Removing the Circuit Boards
10. Remove the following buttons from the Panel Upper Housing.
No. Button No.
1 PS Button 7 Minus Button
2 Copy Button 8 Left Button
3 Memory Card Button 9 Setting Button
4 Fun Print Button 10 Up Button
5 Set Up Button 11 OK Button
6 Zoom Button 12 Low Button
16
Panel Upper Housing
13 10
17
14 11
15 12
Hook
Figure 4-47. Removing the Panel Board (6)

When attaching the buttons, insert the hooks (x2 each) of the
buttons from the front of the Panel Upper Housing, and secure
them properly. (See Figure 4-47.)

Tighten the screws in the order given in

When installing the Panel Board, align the positioning holes
(x4) of the Panel Board with the dowels (x4) of the Panel Upper
Housing. (See Figure 4-45.)

When connecting the LCD FFC, connect the longer folded side
to the LCD Unit as shown in
Revision C
Button No. Button
13 Plus Button
14 Right Button
15 Back Button
16 Stop Button
17 Start Button
5 2 1
7
6 4 3
8
9
Fig. 4-46.
Fig. 4-45.
Confidential
82