Epson Stylus Photo PX650 Service Manual page 46

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
Warning Name
Format check (backup)
Cannot recognize the memory card or disk. Do you want to
format it?
Format check (scan)
Format Warning
A problem occurred while formatting. Formatting canceled.
(Format error) (scan)
Format Warning
The memory card or disk is write-protected. Operation canceled. As the memory card was write-protected, formatting failed.
(card write-protect) (scan)
Format Warning
The memory card or disk was removed. Format canceled.
(card removed) (scan)
Head Cleaning Replace ink cartridge before cleaning print head.
Backup error External device is not connected or media is not inserted.
(no external connection) Backup canceled.
Backup error
(insufficient external media
capacity)
Insufficient space on the backup device. Cannot back up files.
Backup error
(insufficient memory card
capacity)
Backup error (no card) No memory card in slot. Backup canceled.
Backup error
Backup canceled. File name is too long or there are too many
(File name and Folder levels
folder levels.
Error)
Backup Error.
Backup error
Error Code FFFFFFFF
In adjustment of borderless You can change the amount of image expansion, but a white
expansion value border may appear around your photo.
Note * : The actual messages are displayed as error codes corresponding to the cause of the error.
TROUBLESHOOTING
Table 3-2. Warning List (continued)
Displayed Message
*
Troubleshooting When There is Error Display
Occurrence Condition
The media for backup cannot be recognized.
The memory card cannot be recognized.
An error has occurred in formatting the card. Or you pulled
out the media while formatting it.
The media is removed when formatting is to be started.
Head cleaning was attempted in the Ink Low state.
The external device was not connected when backup was
started.
The capacity of the media on which the backup data is to be
saved is insufficient.
No backup source exists.
The file name is too long, or the source has eight or more
levels in folder hierarchy.
An error has occurred at the external device.
This message is always displayed during adjustment of the
Borderless Expansion Value.
See "1.7.3.2 Backup Errors" (p.27)
Revision C
Recovery Procedure
Execute or cancel formatting.
Press the OK button and check the
media.
Insert a memory card not write-
protected and try again.
Insert media and try again.
Cancel the head cleaning, or replace
the ink cartridges.
Connect the external device.
Insert media that has sufficient free
space.
Insert the memory card.
Check the file name and the folder
hierarchy.
Check the external device.
Accept it.
46
Confidential