Paper Eject Frame Assy - Epson Stylus Photo PX650 Service Manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635

Install the PG Left Cam by mating the D cut surfaces and with
the cam positioned outside so that it does not come in contact
with sensing area of the APG Sensor
With the cam
positioned outside
Figure 4-92. Installing the CR unit (2)

Install the CR Unit so that the guide is engaged with the frame.
Rear
Carriage guide
Figure 4-93. Installing the CR unit (3)

When installing the Cable Holder Frame, make sure that it is
positioned correctly in the front and back direction.

A D J U S T M E N T
After removing/replacing the CR Unit, make the specified
R E Q U I R E D
adjustments. (See Chapter 5

After replacing the CR Unit, be sure to perform the required
lubrication. (See Chapter 6
DISASSEMBLY AND ASSEMBLY
.
Must not touch
the sensing area
PG Left Cam
APG Sensor
(Fig. 4-87)
"ADJUSTMENT".)
"MAINTENANCE".)
Disassembling the Printer Mechanism

4.4.11 Paper Eject Frame Assy

 Parts/Components need to be removed in advance
Upper Housing / Scanner Unit / Panel Unit / M/B Cover / Waste Ink Tray Assy /
Middle Housing / Printer Mechanism
 Removal procedure
1. Release the Head FFC from the Front Frame.
2. Remove the screw that secure the Cable Holder Frame to the Front Frame.
Figure 4-87.)
3. Remove the screws (x2) that secure the Front Frame, and remove the Front Frame.
2
Front Frame
Figure 4-94. Removing the Paper Eject Frame Assy (1)
Revision C
(See Figure 4-86.)
(See
1
Protrusion
C.B.S. 3x6 (8±1 Kgfcm)
100
Confidential