Epson Stylus Photo PX650 Service Manual page 67

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
C A U T I O N
When removing the Scanner Unit from the printer, be careful not
to damage the cables of the Scanner Unit connected to the printer.
4. Pull out the hinge of the Scanner Unit on the left side.
5. While keeping the Scanner Unit open at 45 degrees, push it in the direction of the
arrow as shown in Fig. 4-12 to remove the Scanner Unit from the right hinge.
Left
Hinge
Pull out hinge
Figure 4-12. Removing the Upper Housing (2)
DISASSEMBLY AND ASSEMBLY
Right
Groove
Scanner Unit
Hinge
Push Scanner Unit toward the rear
along the angle of rib to remove groove
of Scanner Unit from the right hinge.
Removal of Exterior Parts
6. While holding the Scanner Unit, remove the screws (x7) that secure the Upper
Housing.
1
Upper Housing
Rib 3
Figure 4-13. Removing the Upper Housing (3)
7. Put the Scanner Unit on the Upper Housing.
8. Pull the Panel Unit forward, and release the hooks (x2) on the both sides under the
Panel Unit.
Scanner Unit
Upper Housing
Panel Unit
Left side under Panel Unit
Figure 4-14. Removing the Upper Housing (4)
Do not use these screws holes (x3).
5
6 7
Right side under Panel Unit
Hook
Revision C
2
4
C.B.P. 3x10 (6±1 Kgfcm)
Be careful not to
damage cables
67
Confidential